5 Installation Guide
HUAWEI
8
2.
Now the system will find the new hardware and initialize the new
hardware Installation Shield Wizard automatically.
Removing the Data Card
To remove the Data Card from your laptop, please use the hardware
removing function of the Windows system to stop the operation of the Data
Card, and then pull it out. Follow the procedure below:
1.
Double-click the icon
on the lower right of your laptop screen; an
Unplug or Eject Hardware
dialog box is displayed.
2.
Stop the use of the Data Card hardware "NEC PCI to USB Open Host
Controller".
3.
After the system prompts that it is safe to remove the device, pull out the
Data Card.
Note
l
Do not remove the Data Card directly without following the above
procedures, lest your laptop may be harmed.
l
Do not remove the Data Card when the operating system is in the
Hibernate
or
Standby
mode.