Interface Name
Connector Type Description
CTL-ETH-SFP interface
(1000MBase-X)
SFP
It is not used and reserved for the use after
capacity expansion.
MGMT-ETH interface
(10M/100M/1000M
Base-TX auto-sensing)
RJ45
It connects to the NMS workstation and has
LINK and ACT indicators.
Console interface
RJ45
It connects to the console for on-site
configuration of the system.
AUX interface
RJ45
It connects to the Modem for remote
maintenance through dialing.
CLK/TOD0
RJ45
Bits0: It is used to input or output 2 Mbit/s
clock signals, 2 MHz clock signals, 1pps
+ASCII clock signals, or two channels of
DCLS clock signals.
CLK/TOD1
RJ45
Bits1: It is used to input or output 2 Mbit/s
clock signals, 2 MHz clock signals, 1pps
+ASCII clock signals, or two channels of
DCLS clock signals.
CLK/1PPS
SMB
Bits2: It is used to input or output 2 Mbit/s
clock signals, 2 MHz clock signals, or 1
PPS signals.
CLK/Serial
SMB
Bits2: It is used to input or output 2 Mbit/s
clock signals, 2 MHz clock signals, or
RS232 signals.
NOTE
BITS2 provides two SMB ports, and the signal type can be set to 2Mbps/2Mhz/1PPS+RS232. When signal
is 2Mbps/2Mhz, CLK/1PPS is fixed as input and CLK/Serial is fixed as output. When signal is 1PPS
+RS232, CLK/1PPS and CLK/Serial are bound together, CLK/1PPS signal type is 1PPS whereas CLK/
Serial signal type is RS232, and the setting of input/output apply to both SMB ports.
Interface Attributes
lists the 1000MBase-X-SFP interface attributes.
Table 3-17
1000MBase-X-SFP interface attributes
Attribute
Description
Connector type
SFP
Operation mode
1000M fiber
Standard compliance
IEEE 802.3-2002
HUAWEI CX600-8/16/X3/X8/X16 Metro Service Platform
Hardware Description
3 CX600-X16
Issue 03 (2013-11-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
57
