HUALIAN FRM-980I, Руководство пользователя

Страница: 25 / 32

4.3.8 Control panel removal method

First, remove the back cover of the chassis;

Second step, remove the emergency stop switch (by turning out the red knob on the emergency
stop switch counterclockwise, and then turning out the silver clasp under the red knob
counterclockwise), and remove the pins on the front and rear sides of the temperature controller;

Third step, push the control panel into place in the direction of arrow A in the figure below (at this
time the housing and control panel are loose), then take out the control panel as shown by arrow B.
5 Standard Operation & Parameter Setting
TAKE CARE! INJURED!
Please refer to this manual to operate this machine. It is not allowed to discharge the necessary
protection cover or hull.
TAKE CARE! CLAMPED!
When the machine is running, it is forbidden to put hands into the driving wheel to avoid
clamping hands!
TAKE CARE! SCALD!
When sealing, the temperature outside the surface of heating block can reach over 200
℃
.
Even after cooling, it is still with high temperature.
24