HUALIAN FRM-980I, Руководство пользователя

Страница: 22 / 32

NO. Name Remark
1 Printing Wheel Pin
2 Printing Wheel Shaft Cover
3 Lateral Pin
4 Character Kit
5 Silicone Rubber
6 Locating Pin
7 Printing Wheel
8 Printing Wheel Set Screw

Rotate the pin on the printing wheel cover to let the lateral pin come out of the groove, then the
printing wheel shaft cover will automatically open. Take off the cover to replace the character.

After replacing the character, press the silicone rubber, then cover the printing wheel cover, insert
the lateral pin into the groove of the printing wheel shaft cover, and press the printing wheel pin and
rotate to fix.

Adjustment of space between ink roller and character kit

Rotate screw (5) clockwise, then ink roller (1) will be tilted and move away from the printing wheel.
Rotate screw (5) counterclockwise, the ink roller (1) will press against the printing wheel by the
elastic element.

Adjust the adjustment screw (5) of ink roller swing link, and rotate the printing wheel, then the
character kit will contact with the ink roller (1).And the ink roller can be easily driven by hand.
NO. Name Remark
1 Ink Roller
2
Ink Roller Heating Block
3
Swing Link
4 Adjust Pillar
21