13
21 Groove
22 Scale
23 Stop rail
24 Holder
25 Slot
26 Screw
27 Slot
28 Guide rail
29 Leg
30 Cross strut
31 Longitudinal strut
32 Supports
33 Table width extension
34 Tool hook
A Additional leg
a Hex screw
b Spring washer
c Washer
d Nut
2.2 Items supplied
Please check that the article is complete as
specifi ed in the scope of delivery. If parts are
missing, please contact our service center or
the sales outlet where you made your purchase
at the latest within 5 working days after
purchasing the product and upon presentation
of a valid bill of purchase. Also, refer to the
warranty table in the service information at the
end of the operating instructions.
•
Open the packaging and take out the
equipment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with
plastic bags, foils or small parts. There is a
danger of swallowing or su
ff
ocating!
•
Saw blade guard
•
Push stick
•
Parallel stop
•
Rubber foot (4x)
•
Cross stop
•
Stop rail
•
Leg (4x)
•
Cross strut (2x)
•
Longitudinal strut (2x)
•
Support (4x)
•
Table width extension (2x)
•
Installation material
•
Original operating instructions
•
Safety instructions
3. Proper use
The bench-type circular saw is designed for the
slitting and cross-cutting (only with the cross
stop) of all types of timber commensurate with
the machine
‘
s size. The equipment is not to be
used for cutting any type of round wood.
The equipment is to be used only for its
prescri-bed purpose. Any other use is deemed
to be a case of misuse. The user / operator and
not the manufacturer will be liable for any
damage or inju-ries of any kind caused as a
result of this.
Please note that our equipment has not been
de-signed for use in commercial, trade or
industrial applications. Our warranty will be
voided if the machine is used in commercial,
trade or industrial businesses or for equivalent
purposes.
The equipment is to be operated only with
suita-ble saw blades (saw blades made of HM
or CV) It is prohibited to use any type of HSS
saw blade and cutting-o
ff
wheel.
To use the equipment properly you must also
observe the safety information, the assembly
instructions and the operating instructions to be
