12
secured on a workbench or a table if at all
possible.
–
Support long workpieces (e.g. with a roller
table) to prevent them sagging at the end of a
cut.
–
Attention!
Never remove loose splinters,
chips or jammed pieces of wood while the
saw blade is running.
•
Switch off the machine to troubleshoot or
remo-ve
jammed
pieces
of
wood.
-
Disconnect the main power plug -
•
Refitting, including adjusting and measuring
works, and cleaning must be carried out only
when the motor is switched off.
- Disconnect
the main power plug -
•
Before switching on again, ensure that keys
and adjustment tools have been removed.
Warning!
This electric tool generates an
electromag-netic field during operation. This
field can impair active or passive medical
implants under certain conditions. In order to
prevent the risk of serious or deadly injuries,
we recommend that persons with medical
implants consult with their physician and the
manufacturer of the medical implant prior to
operating the electric tool.
SAFETY
INSTRUCTIONS
FOR
THE
HANDLING OF SAW BLADES
1 Only use insertion tools if you have
mastered their use.
2 Observe the maximum speed. The
maximum speed specified on the insertion
tool may not be exceeded. If specified,
observe the speed range.
3 Observe the motor / saw blade direction of
rota-tion.
4 Do not use any insertion tools with cracks.
Sort out cracked insertion tools. Repairs are
not permitted.
5 Clean grease, oil and water off of the
clamping surfaces.
6 Do not use any loose reducing rings or
bushes for the reducing of holes on saw
blades.
7 Make sure that fixed reducer rings for
securing the insertion tool have the same
diameter and have at least 1/3 of the cutting
diameter.
8 Make sure that fixed reducer rings are
parallel to each other.
9 Handle insertion tool with caution. They are
ideally stored in the originally package or
special contain-ers. Wear protective gloves in
order to improve grip and to further reduce
the risk of injury.
10 Prior to the use of insertion tools, make
sure that all protective devices are properly
fastened.
11 Prior to use, make sure that the insertion
tool meets the technical requirements of this
electric tool and is properly fastened.
12 Only use the supplied saw blade for
sawing opera-tions in wood, materials similar
to wood, plastics and non-ferrous metals
(except for magnesium and alloys containing
magnesium).
2. Layout and items supplied
2.1 Layout (Fig. 1/2)
1. Sawing table
2 Saw blade guard
3 Push stick
4 Saw blade
5 Splitter
6 Table insert
7 Parallel stop
8 Hand wheel
9 Adjusting and locking grip
10 Base frame
11 On/O
ff
switch
12 Eccentric lever
13 Rubber foot
14 Cross stop
15 Screw
16 Extractor adapter
17 Countersunk head screw
18 Hole (splitter)
19 Fastening screw
20 Screw
