7.2 Basic function operation
Read Location through SMS
Please edit SMS send to the SIM which inside the device
Command format is : #000000,RDDL
Then the device will respond a command to the mobile phone together with location information.
Example:
1036 Nan Xin Lu,Nanshan Qu,Shenzhen Shi,Guangdong Sheng, China,518052
Not Located,
URL:http://maps.google.com/maps?q=N22.515370,E113.916970
Remotely cut off fuel and power
Please edit SMS send to the SIM which inserted inside the device
Command format is : #000000,STOC:CUT
This command will valid only when the vehicle speed is less than 20KM/H for security, and the command will not
cut off the fuel and power complete in a short, it is a gradually process.
Fuel and power recover
Please edit SMS send to the SIM which inserted inside the device
Command format is: #000000,STOC:OK
The vehicle fuel and power will recover after send this command.
Over speed alarm
To use the over speed alarm function, first of all need to set the speed value
，
the device will send over speed
alarm based on the settings
Command format is : #000000,STMA:
For example, if set speed value as 80km/h, the command should be: #000000,STMA:80
Power off alarm
Power off alarm can be send to server through GPRS .
Reset device
Device can be reset
Command format is : #000000,REST
Read device parameters and status
If customer want to read the device basic parameters in one message and check the network/GPS status, there is
a command is available for it
Command format: #000000,RDST
OTA Remote Upgrade
Please Give your device IMEI number to distributor, It’s updated from our update server.