30
Installation of indoor unit
2. Remove the wire clip; connect the power
connection wire to the wiring terminal
according to the color; tighten the screw
and then fix the power connection wire
with wire clip.
3. Adjust the position of upper and lower
4. Tighten the screws.
adjusting baffle; clamp the connection
pipe and drain pipe as firm as possible.
and drain hose with the band.
Note:
● If the length of power connection
All wires of indoor unit and outdoor
unit should be connected by a pr-
ofessional.
wire is insufficient, please conta-
● For the air conditioner with plug,
the plug should be reachable
after finishing installation.
● For the air conditioner without
plug, an air switch must be inst-
alled in the line. The air switch
should be all-pole parting and the
contact parting distance should
be more than 3mm.
ct the supplier for a new one. Avo-
id extending the wire by yourself.
1. Bind up the connection pipe, power cord
Step seven: bind up pipe
indoor unit
gas pipe
indoor and outdoor power cord
liquid pipe
drain hose
band
2. Reserve a certain length of drain hose
and power cord for installation when
binding them. When binding to a certain
degree, separate the indoor power and
then separate the drain hose.
drain hose
band
connection pipe
indoor power cord
3. Wrap it evenly, and rolling width
4. The liquid pipe and gas pipe sho-
should be 1/3 of bandaging belt.
uld be bound separately at the end.
Do not wrap it too tight or too loose.
Note:
●
The power cord and control wire
can't be crossed or winding.
the bottom.
●
The drain hose should be bound at
blue
brown black vioet
yellow-
green
L1
L2 L3
N
Outdoor unit connection
