lp-32 Rev. 003 Rel. 010 Date 2.22.19
10
Coil Booster Stainless Steel Storage Tank
Ten (10) Year Limited Warranty
For Residential and Commercial Use
HTP warrants each coil booster stainless steel storage tank to be free
from defects in materials and workmanship according to the following
terms, conditions, and time periods. UNLESS OTHERWISE NOTED
THESE WARRANTIES COMMENCE ON THE DATE OF INSTALLATION.
This limited warranty is only available to the
original consumer
purchaser
(hereinafter “Owner”) of the storage tank, and is non-
transferable.
COVERAGE
A.
This warranty covers the storage tank assembly ONLY. The storage
tank assembly consists of a stainless steel storage tank, insulation,
and outer jacket.
B. Should a defect or malfunction result in a leakage of water from
the storage tank within the above-stated warranty periods due
to defective material or workmanship, malfunction, or failure to
comply with the above warranty, with such defect or malfunction
having been verified by an authorized HTP representative, HTP
will replace the defective or malfunctioning storage tank with
a replacement of the nearest comparable model available at
the time of replacement. The replacement storage tank will be
warranted for the unexpired portion of the applicable warranty
period of the original storage tank.
C. In the event of a leakage of water of a replacement storage
tank due to defective material or workmanship, malfunction, or
failure to comply with the above warranty, HTP reserves the right
to refund to the Owner the published wholesale price available at
the date of manufacture of the original storage tank.
D. If government regulations, industry certification, or similar
standards require the replacement storage tank to have features
not found in the defective storage tank, the Owner will be charged
the difference in price represented by those required features. If
the Owner pays the price difference for those required features
and/or to upgrade the size and/or other features available on
a new replacement storage tank, the Owner will also receive a
complete new limited warranty for that replacement storage
tank.
E. If at the time of a request for service the Owner cannot provide
a copy of the original sales receipt or the warranty registration,
the warranty period for the storage tank shall then end ten (10)
years from the date of manufacture of the storage tank and NOT
the date of installation of the storage tank.
F. This warranty extends only to storage tanks utilized in heating
applications that have been properly installed by qualified
professionals based upon the manufacturer’s installation
instructions.
G. It is expressly agreed between HTP and the Owner that repair,
replacement, or refund are the exclusive remedies of the Owner.
OWNER RESPONSIBILITIES
The Owner or Qualified Installer / Service Technician must:
1. Have a relief valve bearing the listing marks of the American
Society of Mechanical Engineers (ASME) installed with the storage
tank assembly in accordance with federal, state, and local codes.
2. Have a vacuum relief valve certified to ANSI Z21.22 - Relief
Valves for Hot Water Supply Systems - installed with the storage
tank assembly in accordance with federal, state, and local codes
and in installations prone to vacuum related damages.
3. Maintain the storage tank in accordance with the maintenance
procedure listed in the manufacturer’s provided instructions.
Preventive maintenance can help avoid any unnecessary
breakdown of the storage tank and keep it running at optimum
efficiency.
4. Maintain all related system components in good operating
condition.
5. Use the storage tank in an open system, or in a closed system
with a properly sized and installed thermal expansion tank.
6. Use the storage tank at water pressures not exceeding the
working pressure shown on the rating plate.
7. Keep the storage tank free of damaging scale deposits.
8. Make provisions so if the storage tank or any component or
connection thereto should leak, the resulting flow of water will
not cause damage to the area in which it is installed.
WARRANTY EXCLUSIONS
This limited warranty will not cover:
1. Any storage tank purchased from an unauthorized dealer.
2. Any storage tank not installed by a qualified heating installer /
service technician, or installations that do not conform to ANSI,
CSA, and/or UL standards, as well as any applicable national or
local building codes.
3. Service trips to teach the Owner how to install, use, maintain,
or to bring the storage tank installation into compliance with
local building codes and regulations.
4. The workmanship of any installer. The manufacturer disclaims
and does not assume any liability of any nature caused by
improper installation, repair, or maintenance.
5. Electricity or fuel costs, or increased or unrealized savings for
same, for any reason whatsoever.
6. Any water damage arising, directly or indirectly, from any
defect in the storage tank or component part(s) or from its use.
7. Any incidental, consequential, special, or contingent damages
or expenses arising, directly or indirectly, from any defect in the
storage tank or the use of the storage tank.
8. Failure to locate the storage tank in an area where leakage
of the tank or water line connections and the relief valve will
not result in damage to the area adjacent to the storage tank
or lower floors of the structure, as well as failure to install the
storage tank in or with a properly sized drain pan routed to an
approved drainage location.
9. Any failed components of the system not manufactured by
HTP as part of the storage tank.
10. Storage tanks repaired or altered without the prior written
approval of HTP.
11. Damages, malfunctions, or failures resulting from improper
installation, or failure to install the storage tank in accordance
with applicable building codes/ordinances or good plumbing
and electrical trade practices; or failure to operate and maintain
the storage tank in accordance with the manufacturer’s provided
instructions.
12. Damages, malfunctions, or failures resulting from failure to
operate the storage tank at pressures not exceeding the working
pressure shown on the rating label.
13. Failure to operate the storage tank in an open system, or
in a closed system with a properly sized and installed thermal
expansion tank.
14. Failure or performance problems caused by improper sizing
of the storage tank, expansion device, or piping.
15. Damages, malfunctions, or failures resulting from vacuum
conditions.
16. Damages, malfunctions, or failures caused by operating the
storage tank with modified, altered, or unapproved components,
or any component / attachment not supplied by HTP.
17. Damages, malfunctions, or failures caused by abuse, accident,
fire, flood, freeze, lightning, electrochemical reaction, acts of God
and the like.
18. Tank failures (leaks) caused by operating the storage tank in
a corrosive or contaminated atmosphere.
19. Failure of the tank due to the accumulation of solid materials
or lime deposits.
20. Any damage or failure resulting from improper water
