HTC GL PS, Руководство пользователя

Страница: 7 / 27

HTC GL PS Introduction
1.0 1
1 Introduction
1.1 General Information
HTC GL PS is a pre-separator that is best used together with HTC's grinding machines
and dust extractors in connection with dry grinding of stone and concrete floors, and in
accordance with HTC's recommendations. The dust sucked up is collected in a bag
under the pre-separator.
Read the manual carefully so that you know how to use and maintain the pre-separator
before using it. Contact your local retailer for further information. For contact
information, see Contact Information at the start of the manual.
1.2 Responsibility
Even though every effort has been made to make this manual as complete and accurate
as possible, we bear no responsibility for incorrect or missing information. HTC
reserves the right to change descriptions in this manual without giving prior notice.
This manual is protected by the Copyright Act and no part of it may be copied or used
in any other way without the written approval of HTC.
1.3 Manual
In addition to the general functions, this manual deals with the areas of application and
the maintenance of the machine.
1.3.1 Safety Instructions – Explanation of Symbols
A number of symbols are used in the manual to highlight the most important sections,
see below. It is important that you carefully read through the descriptions of the symbols
in order to avoid the risk of both material damage and personal injury. There are other
symbols indicating practical tips. These are to help you use the machine in the easiest
and most effective way.
The following symbols are used in the document to indicate where special attention is
needed.
Warning!
This symbol means Warning! and indicates a risk of personal injury or material
damage in the event of incorrect use of the machine. If you see this symbol next
to a section of text, you must pay particular attention when reading through the
text and not carry out any operations of which you are unsure. This is for your
own and other users’ safety and to avoid damage to the machine.