HTC confidential
© 2004, HTC Corporation. All rights reserved.
TOTAL 71 CONT.ON. 27 PAGE NO. 26
Assemble the vibrator on main board and
please pay attention on the wire location.
The wire location is beneath main board as
indicated on the left.
Insert the keypad FPC into the side connector of
main board, and then paste the soldering-proof tape
on it as indicated on the left.
1. Assemble the housing, and then fasten 4
screws on rear back of unit and 2 screws on the
side of unit.
2. Paste the warranty seal on the housing.
3. Insert the battery, and then push fixing lock.
[Note]:
1. Set screw driver torque to 0.9
±
0.05kgf-cm.
2. Please set the volume button on the center
before assembly.
