HTC confidential
© 2004, HTC Corporation. All rights reserved.
TOTAL 71 CONT.ON. 14 PAGE NO. 13
Next, remove the camera FPC, unlock the
connector lock with a tweezers.
For Camera FPC, to lift the connector lock upwards
from both ends at the same time as indicated in the
picture. The angle must not exceed 90 degrees.
Unfasten the 2 screws to disconnect the main board
from Housing Frame as indicated on the left.
Note that screw P/N is
72H00528-00M.
Next, pull up the main board in 30 degrees to
disconnect LCD FPC and Touch Panel FPC with
tweezers.
