HTC confidential
© 2004, HTC Corporation. All rights reserved.
TOTAL 71 CONT.ON. 19 PAGE NO. 18
Next, remove the switch board FPC, unlock the
connector lock with a tweezers.
(Suggest to use plastic made)
For S/W FPC, to lift the connector lock upwards
from both ends at the same time as indicated in the
picture. The angle must not exceed 90 degrees.
Unfasten 2 screws at both sides of lower location of
bezel as indicated on the left.
Next, to separate the LCD from the bezel as
indicated on the left.
