THT32
EN - 18
6 MAINTENANCE
6.1 GENERAL
INFORMATION
1. The instrument you purchased is a precision instrument. While using and storing the
instrument, carefully observe the recommendations listed in this manual in order to
prevent possible damage or danger during use.
2. Do not use the instrument in environments with high humidity levels or high
temperatures. Do not expose to direct sunlight.
3. Always switch off the instrument after use. In case the instrument is not to be used for a
long time, remove the battery to avoid liquid leaks that could damage the instrument
’
s
internal circuits.
6.2 RECHARGING THE INTERNAL BATTERY
The instrument is designed to be supplied with a Li-ION rechargeable battery. With symbol
“
”
shown on the display, it is necessary to recharge the battery.
CAUTION
The battery must not be removed from the instrument while recharging.
Recharge the battery at environmental temperature and, anyway, in a
range between
0°C
and
50°C
(32°F and 122°F).
When using the instrument for the first time, recharge the battery for at
least
6 hours
.
1. Connect the battery charger provided with the instrument to the AC electric mains and
the mini USB port to the instrument's input (see Fig. 2
–
Part 6). The symbol
“
”
appears on the display
2. The charging process takes
approximately 3 hours
. When operation is complete,
disconnect the battery charger from the instrument and from the electric mains, when
the display shows the symbol
“
”
of full battery charge.
6.3 CLEANING THE INSTRUMENT
Use a soft and dry cloth to clean the instrument. Never use wet cloths, solvents, water, etc.
6.4 END OF LIFE
WARNING
: this symbol found on the instrument indicates that the appliance, its
accessories and the batteries must be collected separately and correctly
disposed of.
6.5 ACCESSORIES
6.5.1 Accessories
provided
Rechargeable Li-ION battery
Adapter AC/DC 100-240V/5V
Micro SD card, 4GB + SD card reader
USB
cable
Tripod
ISO9000 calibration certificate
User
manual
Transport
case
