ECLIPSE - HT9025
EN - 16
10. Use arrow key
X
to select options:
ON
(activation),
OFF
(deactivation).
11. Press the arrow key
W
, key
or key
HOLD/REL
to confirm and quit the general
menu.
Command Emissivity (ECLIPSE)
12. Select item
“
Emissivity
”
and press keys
or
X
to set the value of parameter
Emissivity to be used in Thermal Camera mode
13. Use the arrow keys
S
or
T
to select the value within range:
0.01 ÷ 1.00
14. Press the arrow key
W
, key
or key
HOLD/REL
to confirm and quit the general
menu.
Command Recording
This command allows setting the parameters and activating the recording of the values of
the quantities measured by the instrument in Multimeter mode. For operating instructions,
see § 5.13.
Command Language
15. Select item
“
Language
”
and press keys
or
X
to enable language selection.
16. Use arrow keys
S
or
T
to select the language among the available options.
Fig. 14: Language Menu
17. Press the arrow key
W
, key
or key
HOLD/REL
to confirm and quit the general
menu.
Command Settings
18. Select item
“
Settings
”
and press key
or
X
to display system settings. The following
screen appears on the display:
Fig. 15: Settings Menu (ECLIPSE and HT9025)