HSS Hire MI TOWER, Инструкция по эксплуатации и безопасности

Страница: 32 / 36

Mi TOWER STAIRS 2.7M & 4.7M - ASSEMBLY
Page 31
STEP 1
Fully insert the adjustable legs with rubber feet into two walk-through gate
frames, turning the leg’s height adjustment collar to bring alll four legs to the
lowest position.
STEP 3
Construct the uppermost frame assembly. Release the easy-clip frame clips
on one four rung frame. Take the uppermost walk-through gate frame and fit
the four rung frame on top.
Apply the Easy-Clip frame clips and ensure they are correctly locked.
STEP 4
Place the lowermost frame assembly at the lowermost position of the
staircase and attach the guardrail brace panel on the gate locking pin side of
the frame ensuring its upper hook is placed above the upper positioning ring.
Ensure the two hooks are facing outwards and correctly locked on to
the frame tube.
STEP 2
Construct the lowermost frame assembly. Release the easy-clip frame clips
on the two rung and one four rung frame. Take the lowermost walk-through
gate frame and fit the two rung frame on top followed by the four rung
frame.
Apply the Easy-Clip frame clips and ensure they are correctly locked.
STEP 5
With your assistant holding the lowermost frame assembly and guardrail
brace panel, place the uppermost frame assembly at the uppermost position
of the staircase.
Attach the guardrail brace panel to the vertical tube of the uppermost frame
assembly ensuring the upper brace hook is above the lower positioning ring.
Make sure the hooks are correctly locked on the frame tube of the
uppermost frame assembly.
332_MI TOWER_12/06/2019