HSS Hire MI TOWER, Инструкция по эксплуатации и безопасности

Страница: 22 / 36

MI TOWER+
4
m - ASSEMBLY
Page
2
1
STEP 1 FROM TROLLEY
For ease of storage and transportation your is designed
so that all the components can be safely stored within the tower’s
base. Start by removing the free-standing components from within the
trolley and stack safely nearby for use. Remove one of the guardrail
brace panels and the hatch platform and store these with the other
components. Level the base as described in Step 2 and move to Step 3.
STEP 1 FROM COMPONENTS
Fully insert the adjustable legs with castors into two frames, turning the
leg’s height adjustment collar to bring each leg 25mm from the lowest
position.
STEP 2
Attach a guardrail brace panel to the vertical tube of one frame with the
upper claw positioned above the fourth rung and with all claws facing
outward. Make sure the claws are correctly locked on to the frame
tube. Now attach the second frame to the guardrail brace panel to
create the base frame assembly. Lock all four castors and using a spirit
level as a guide, adjust each leg to bring the base square and level.
STEP 3
Construct two sets of conjoined frames, these will give you two 2m
sections and will speed up the erection process. Release the frame clips
on one four rung frame and fit it on to a second four rung frame. Apply
the frame clips and ensure they are correctly locked. Repeat this with
the second set. Fit one set of conjoined frames to a base frame and
apply the frame clips. Repeat this with the second set.
STEP 4
Next, attach one guardrail brace panel with its lower jaw positioned
above the sixth frame rung. It must be fitted on the opposite side to the
first guardrail brace panel to ensure stability. Ensure all claws are facing
outward and correctly locked on to the frame tube.
332_MI TOWER_12/06/2019