HSS Hire MI TOWER, Инструкция по эксплуатации и безопасности

Страница: 25 / 36

4m - ASSEMBLY
Page
24
STEP
14
Access the first platform and carefully fit the second platform on to
the sixteenth rung, making sure that the wind-lock catches engage.
Next extend and lock the four component hangers located on either
side of the second platform. Move the two guardrail brace panels
from the hangers on the first platform on to the the hangers of the
second platform and then repeat the process with the toeboard set
on the other side of the platform.
STEP
15
Access the tower until you are half way through the second platform’s
trap door. Now manoeuvre yourself so that you are sitting on the
platform, with your legs through the trap door and your feet on the
frame rungs. From this position, you should take each of the guardrail
brace panels, one at a time, and attach so that the upper jaws are
positioned above the uppermost rung.
STEP
16
With both guardrail brace panels in position, you may access the
platform. Unfold the toe board set and position so that it sits on the
outer edge of the platform. Finally, retract all hangers and the tower is
now complete and ready to use.
332_MI TOWER_12/06/2019