Safety
4
2022-09-01
FM 239 MuW Beta Type Z Rev.01
distributed by
1.3
General safety
Preconditions for
operation
The linear unit must not be put into operation until the machine or line
into which it is
installed
conforms to the following:
•
Relevant accident prevention regulations
•
Generally accepted safety standards
•
EU directives
•
Standards governing the electromagnetic compatibility of machinery
•
Other applicable standards
•
Applicable national legislation.
Safe operation
To ensure safe operation, refer to the following documents:
•
This operating manual for the linear unit, particularly the technical
data
•
The operating manual for the line into which it is installed
1.4 Use in clean rooms (ISO 14644)
The linear units used in clean rooms are fitted with a vent hole
(generally G1/2
“) at the basic profile.
The following guidelines must be observed:
•
The linear unit must be subjected to a negative pressure of 0.2 bar.
•
The linear unit must be relubricated with a grease suitable for use
in clean rooms (basic lubrication carried out using Klübersynth
BEM 32-34).
1.5 Use in explosive environments
The following applies to Beta 100-D-ZSA:
The linear unit is not suitable for use in potentially explosive
atmospheres.
Содержание Beta 100-D-ZSA
Страница 2: ......