11
FH67 Series
●
0.5mm Pitch, 3.57mm depth One Action Lock, Vertical connection FPC/FFC/Shield FFC connector
[Operation Method]
(Example 7)
Lock lever (open)
FPC is inserted diagonally,
leaving a large gap between
FPC and the housing.
FPC positioned diagonally is not
inserted to the back of the mating port.
FPC is not inserted deep enough down
to the back of the mating port.
FPC inserted to the back of the
mating port.
Can see viewing section when
FPC is inserted to the back of
the mating port.
Cannot see viewing
section when FPC is
not fully inserted.
Cannot see viewing
section when FPC is
not fully inserted.
The protrusion of the
lock lever runs over the
FPC tab.
The protrusion of the
lock lever runs over the
tab.
FPC is not inserted deep enough,
leaving a large gap between FPC
and the housing.
FPC (diagonal)
FPC
(diagonal)
±2.5
°M
A
X
NG
NG
NG
NG
NG
(Example 8)
(Example 9)
(Example 11)
(Example 12)
(Example 10)
―
Cross section of the lock section
― ―
Cross section of the lock section
―
―
Cross section of the lock section
―
OK
3. Confirming the mated state of FPC
When FPC is completely inserted, visually inspect the inserted status of FPC. (Example 10)
(This connector uses the lock protrusion of the lock lever for positioning FPC.)
[Caution]
· FPC is not inserted deep enough or in a diagonal direction. (Example 11)(Example 12)
· Because of the one action lock, the lever does not need to be operated after inserting FPC.
Sep.1.2020 Copyright 2020 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
