10
FH67 Series
●
0.5mm Pitch, 3.57mm depth One Action Lock, Vertical connection FPC/FFC/Shield FFC connector
[Operation Method]
2. How to insert FPC
Insert FPC to the end correctly (Example 2) vertical to the board surface.
[Caution]
· Please confirm that the lock lever is closed when you insert FPC.
Do not insert FPC while the lock lever is open. (Example 3)
Product is designed so that the FPC cannot be inserted when the lock lever is opened. However forcing
insertion is a cause of damage.
· Do not FPC while at the same time pressing the lock lever. (Example 4)
· Insert FPC pattern side facing opposite of the lock lever operation part. (Example 5)
· Insert FPC straight after positioning its tip end vertically in reference to the guides on both ends of the
connector mating port. (Example 6)
· Do not insert diagonally. (Example 7)
· When inserting, do not move the FPC in a vertical, lateral or diagonal direction. (Example 8)
(Recommended Insertion Angle ±2.5°)
· Refrain from opening the lock level with a finger when inserting the FPC. (Example 9)
Lock lever (open)
Lock lever (open)
PC (vertical)
FPC pattern side
FPC (vertical)
Lock lever (open)
Lock lever
operation part
Insert FPC straight after positioning both its
ends vertically in reference to the guides on
both ends of the connector mating port.
NG
NG
(Example 6)
(Example 5)
OK
OK
(Example 2)
(Example 3)
(Example 4)
Sep.1.2020 Copyright 2020 HIROSE ELECTRIC CO., LTD. All Rights Reserved.