HQUA UV Water Sterilizer, Инструкция по эксплуатации

Страница: 5 / 12

General Information
5
HQUA
2.2 Installation UV Water Sterilizer
Follow the installation steps one by one, make sure you understand each step before you move on it.
Contact the manufacturer and seller or its service agent if you misunderstand the steps in this section.
Prerequisites:
• Measure your water pipe system,make sure you have enough space for this product.Mark the
mounting position and drill two holes on the wall. Screw on the plastic bracket for later use.
• Make sure you have an adequate clearance above chamber to allow for removal of the lamp and
sleeve.
• Make sure you have turned off the main water supply already.
• Pay attention to the labels appear in the installation procedures. Carefully operate please.
• Do Not Connect The UV Water Sterilizer To Electric Supply Before Your Finish The
Installation.
Procedures: