HPRT HN-3208SR-000R, Руководство пользователя

Страница: 30 / 61

HN-3208SR-000R User Manual
26

Once Recognizing Time
In sensing recognizing mode, the parameter indicates the maximum time of allowing recognizing
engine to continuously collect and identify barcode before recognizing successfully. After recognizing
successfully or once recognition timeout, the recognizing engine will enter the interval of not
collecting the recognition. The range of once recognition time is 0.1~9.9s, step length is 0.1s. When
set to 0, the recognition does not wait. Default time is 1s. Please refer to the Chapter 8 for the setting
method.
3.3 Continuous Mode
Continuous mode means that the scanner continuously shoots, recognizes and output the
information. In this mode, the same barcode cannot be output.
Continuous light

Once Recognizing Time Limit
In continuous mode, it indicates the maximum time of scanner continuously collect and identify
barcode before recognizing successfully. If it times out, it will enter the interval of not collecting and
recognizing according to the setting. The code recognizing time is 100ms in units, which can be set to
0.1~9.9s. When it be set to 0 that indicates no waiting. Please refer to chapter 8 of the setting method.
3.4 Command Trigger Recognizing Mode
In this mode, scanner needs the upper computer to trigger and decode the barcode. The scanner can
set the length of the recognizing time. The recognizing code time can be set to 0.1~9.9s. When it be
set to 0 that indicates no wait. Please refer to chapter 8 of the setting method.