HPRT HN-3208SR-000R, Руководство пользователя

Страница: 14 / 61

HN-3208SR-000R User Manual
10
1.7 Barcode Recognition
In manual recognition mode, the procedure for scanning barcodes is as follows:
(1) Make sure that the scanner, data cable, data receiving host, and power supply are properly
connected and turned on.
(2) Hold down the trigger to activate the light.
(3) Align the sighting line to the center of the barcode, move the scanner and adjust the distance
between it and the barcode to find the best recognizing distance.
(4) When hear the prompt sound, the infrared light goes out and the barcode recognizing
successfully, then the scanner will decode the data to the host.
(5) All set barcodes are saved by power outage.
▲
Note: For the same batch of barcodes, the distance between the scanner and the barcode in a
certain range which success rate of the recognition barcode will be very high and that distance is
the best recognizing distance in the recognizing process.
1.8 Use the Setting Barcode
Set the parameter to a special barcode whose barcode type is barcode128. When it scans to a barcode
software that matches the setting type of setting, it will automatically enter the setting and does not
send the results on the host. All set barcodes are saved by power outage. (except to restore factory
settings)
1.9 Restore Factory Defaults
Note: Please use the "Restore Factory defaults" function carefully, and when you scan this setup
barcode, the current parameter settings will be lost and replaced with the factory default values.
Restore Factory defaults
0000