hpmont HD3N-2D0P7G-TC, Руководство пользователя, Страница: 41 / 76

Chapter 5 Function Introduction Shenzhen Hpmont Technology Co., Ltd.
―
34
―
HD3N-TC Series Inverter User Manual V1.0
Ref. code Name Description Setting Range [Default]
F01.02 Function code parameter initialization (download) 0 - 6 [0]
0: No operation. Inverter is in regular parameter read / write status.
•
Whether can change the parameter depends on user password status
and the actual running condition of inverter.
1: Restore to factory settings.
•
Except F01.00, F01.02, F01.03, group F08, F13.01 - F13.15, F19.19, F19.24,
F20.08, F20.09, F20.21 - F20.37, F23.00 and group y.
•
Steps: If set F01.02 = 1, press to ensure and the parameters are
restored to factory settings. The keypad dispalys “rESEt”. Then the
keypad will display parameters in stop status after finish restoring to
factory setting.
2: Download the keypad EEPROM parameter 1 to the current function code settings.
3: Download the keypad EEPROM parameter 2 to the current function code settings.
4: Clear fault information. The fault history of F20.21 - F20.37 will be cleared.
5: Copy the keypad EEPROM parameter 1 to the current function code settings (including the motor
parameters).
6: Copy the keypad EEPROM parameter 2 to the current function code settings (including the motor
parameters).
Note:
1. F01.00, F01.02, F01.03, F20.21 - F20.37 and group y can not be copied.
2. Parameter copying (No. 2/3/5/6 function ) is valid when LED keypad adopted.
F01.03 Copy parameter to keypad (upload) 0 - 2 [0]
0: No operation. Inverter is in regular parameter read / write status.
1: Copy the current function code settings to keypad EEPROM parameter 1.
2: Copy the current function code settings to keypad EEPROM parameter 2.
Note:
1. F01.00, F01.02, F01.03, F20.21 - F20.37 and group y can not be copied.
2. Parameter copying (No. 1/2 function) is valid when LED keypad adopted.
F01.02 =2/3/5/6
Keypad
HD3N-TC
Download / copy
keypad parameter
Keypad
HD3N-TC
Copy parameter
to keypad
F01.03 =1/2