background image

Variable field of view

Warranty

 
HPM Legrand will honour all statutory guarantees that you as a consumer are 
entitled to rely upon under the Australian and New Zealand Consumer Laws against 
a manufacturer including a guarantee that this product is of acceptable quality. 
To make a claim under any statutory guarantee you should first contact the supplier, 
or retailer from whom you purchased this product.

Customer Service

 

For all Customer Service and Technical Support  
please call Monday to Friday during business hours.

HPM Legrand Australia
1300 369 777
www.hpm.com.au

HPM Legrand New Zealand
0800 476 009
www.hpm.co.nz

ABN: 31 000 102 661

LE08769AAB

 

10_2015

HPML0433

3   Wall Cut Out 

Recommended Cut-Out Sizes to Fit Finished Products
Used on

A

B

Min Wall Cavity (mm)

MIN

MAX

MIN

MAX

XL777X

70

92

50

56

50

XLV777X

74

92

52

56

LN777X

96

100

58

60

Disclaimers

• This product must be installed by a licensed electrician.
• For indoor use only.
• Some references are suitable for installation in wall boxes or single brick applications.
•  This product should not be installed in areas exposed to constant vibration, temperature fluctuations,  

or areas of high humidity.

•  This product contains no serviceable parts and no attempt should be made to repair this product. If the product is faulty it 

should be discarded.

• This product has been designed to operate in ambient temperatures 5°C to 40°C.
•  The material in this product may vary in colour from batch to batch. Colour matching from one batch to another cannot be 

guaranteed.

•  Electrical installations periodically receive transient over voltages. This product has been designed to minimise the effect 

of such voltages on connected equipment. It may not give full protection for extreme over voltage transients such as those 

resulting from a close lighting strike.

• This product has been designed to operate on a nominal supply voltage of 230 - 240V a.c.  +/- 6%.
•  Cable wiring of different voltage systems, such as Low Voltage and SELV cables, shall not share the same conduit
• This product must be installed and used as per these instructions.
•  This product utilises intellectual property in the form of registered designs, trademarks, and/or patents. Such intellectual 

property remains the property of HPM Legrand in all cases

• HPM Legrand reserves the right to modify the specification of this product at any time.

Wall cut out for standard installation only

Содержание 770USB2PSAMWE

Страница 1: ...ith USB mechanism stand alone in plate Connect USB module wires to the mains cable via insulated connectors 401 series as per diagram below 1 2 Features Installation Cat No 770USB2PSAMWE 770USB2PSAMBL 770USB2PSXMWE 770USB2PSXMBL Ouput 5V d c 5 4 8 A Input current 10A GPO 230 240V a c 50Hz Mains connections Via A and N wires Standby power consumption 0 07W Overload protection on output 5 1A NOTE US...

Страница 2: ...k wall Wall cavity Plasterboard 0 8Nm 1 Push assembled unit into the wall cavity 2 Screw the unit to wall with standard mounting accessories and then fix front plate Plasterboard Mains cable Wall cavity Cable tie box to Mains cable to avoid strain on USB mechanism Metal bracket Brick wall 0 8 Nm Brick wall Plasterboard Mains cable Wall cavity Cable tie box to Mains cable to avoid strain on USB mec...

Страница 3: ...h corresponding mains cables Use junction box 404 or equivalent for mains wiring connection USB driver Connect mains cables to GPO Ceiling Insulation area CLICK Note In application requiring the 3m USB extension lead it shall not share the same conduit as the 240V a c mains wiring in accordance with the Wiring Rules The 3m extension lead is suitable for a standard Ø20mm conduit Do not cover this U...

Страница 4: ...stant vibration temperature fluctuations or areas of high humidity This product contains no serviceable parts and no attempt should be made to repair this product If the product is faulty it should be discarded This product has been designed to operate in ambient temperatures 5 C to 40 C The material in this product may vary in colour from batch to batch Colour matching from one batch to another c...

Отзывы: