HPE XP P9000, Руководство пользователя, Страница: 264 / 286

Item Description
SMTP-AUTH Specify whether to use SMTP authentication.
• Enable : Uses SMTP authentication.
• Disable : Does not use SMTP authentication.
Account
andPassword Set the account and password for SMTP authentication. Required when SMTP-
AUTH is Enable. Enter up to 255 alphanumeric characters and symbols (ASCII
codes) for user ID and password, except for the following symbols and a space:"
\ ; : , * ? < > | / # and + = [ ] ' { } ^
From Address Specify an e-mail address of the sender. Enter up to 255 alphanumeric characters
(ASCII codes) and symbols: ( ! # $ % and ` + - * / ^ { } _ . ).
Return Address Specify a Reply-To address of e-mail. If you specify this address, replies from the e-
mail receivers will be sent to this address. If you omit this address, replies from the
e-mail receivers will be sent to From Address. The available values are the same as
those of From Address.
To Address Specify e-mail addresses of the receivers and the attributes (To, Cc, or Bcc). Up to
32 addresses can be specified. The available values are the same as those of From
Address.
Test Send When you click Test Send , test e-mails are sent to the e-mail addresses of the
receivers. This button is available only in Modify mode.
Apply Implements all the settings. This button is available only in Modify mode.
Cancel Cancels all the settings. This button is available only in Modify mode.
Report Display dialog box
264 Remote Web Console GUI reference (secondary windows)