HPE SN2100M, Руководство пользователя по оборудованию

Страница: 67 / 131

Interfaces
67
User Manual
Figure 71: SN2010M QSFP Port LEDs
Figure 72: SN2010M SFP Port LEDs
In the SN2410M/SN2410bM systems, the status of each pair of adjacent QSFP28 ports is indi-
cated by four LEDs, as shown in the picture above:
• While the bottom LEDs signify the port status in regular condition, the upper LEDs
operate only when the port is split.
• When one port is split to two, a connection of 100GbE can be utilized in its adjacent
port.
• When one port is split to four, it adjacent port is canceled.
• If the ports run at a 100GbE/40GbE speed each, the two lower LEDs (2 and 4) will light
green.
• If the ports run at a 50GbE speed each, the left LEDs (1 and 2) will light green for the
upper port, and the right LEDs (3 and 4) will light green for the lower port.
• If the ports run at a 25GbE/10GbE speed each, all LEDs may light green, according to
the selected lane.
Table 23 - Port LEDs in Ethernet System Mode
LED Behavior Description Action Required
Off Link is down. Check the cable
Solid Green Link is up with no traffic. N/A
Flashing Green Link is up with traffic. N/A