HPE ProLiant DL388 Gen10 Скачать руководство пользователя страница 99

Страница: 99 / 169

Click

Type the serial number and press

Enter

Select the Product ID field and press

Enter

The following alert appears:

Product ID is modified only by qualified personnel. This value must match the
product ID located on the chassis.

Type the product ID and press

Enter

Press

F10

to save the configuration.

The procedure is complete.

Restoring logical NVDIMMs after system board replacement

If the data in the logical NVDIMMs has changed since the last Scalable Persistent Memory backup operation
and the data has not been backed up using other means, the changed data will be lost.

The logical NVDIMMs (configuration and data) from the last Scalable Persistent Memory backup are stored
on the drives.

The logical NVDIMMs can be restored from the drives after the motherboard is replaced.

Procedure

Launch the System ROM System Utilities by pressing the

key during POST.

Navigate to the

Scalable Persistent Memory Options

menu.

System configuration > BIOS/Platform Configuration (RBSU) > Memory Options > Persistent Memory
Options > Scalable Persistent Memory Options

Set the Functionality field to

Enabled

Select the

Recovery Options

submenu.

Set the Restore Configuration field to

Enabled

Select

F12: Save Changes and Exit

Select

Yes - Save Changes

Press the

Enter

key to reboot the server.

The configuration and data on the logical NVDIMMs will be restored during the system boot process.

HPE Trusted Platform Module 2.0 Gen10 Option

The HPE Trusted Platform Module 2.0 Gen10 Option is not a customer-removable part.

CAUTION:

If the TPM is removed from the original server and powered up on a different server, data

stored in the TPM including keys will be erased.

If you suspect a TPM board failure, leave the TPM installed and remove the system board (

Removing and

replacing the system board

on page 95). Contact a Hewlett Packard Enterprise authorized service provider

for a replacement system board and TPM board.

Removal and replacement procedures

Содержание ProLiant DL388 Gen10










































































































































































Результаты поиска

Содержание ProLiant DL388 Gen10

Отзывы:

Похожие инструкции для ProLiant DL388 Gen10

Бренды по названию

Популярные бренды

HPE ProLiant DL388 Gen10, Руководство по техническому обслуживанию и ремонту

Результаты поиска

Содержание ProLiant DL388 Gen10

Отзывы:

Похожие инструкции для ProLiant DL388 Gen10

Бренды по названию

Популярные бренды