HPE ProLiant DL388 Gen10 Скачать руководство пользователя страница 41

Страница: 41 / 169

This symbol indicates the presence of a hot surface or hot component. If this surface is
contacted, the potential for injury exists.

WARNING:

To reduce the risk of injury from a hot component, allow the surface to cool

before touching.

This symbol indicates that the component exceeds the recommended weight for one
individual to handle safely.

WARNING:

To reduce the risk of personal injury or damage to the equipment, observe

local occupational health and safety requirements and guidelines for manual material
handling.

These symbols, on power supplies or systems, indicate that the equipment is supplied by
multiple sources of power.

WARNING:

To reduce the risk of injury from electric shock, remove all power cords to

disconnect power from the system completely.

Server warnings and cautions

Before installing a server, be sure that you understand the following warnings and cautions.

WARNING:

To reduce the risk of electric shock, personal injury, and damage to the equipment:

• Do not attempt to service any parts of the equipment other than those specified in the following

procedure. Any other activities may require that you shut down the server and remove the power
cord.

• Installation and maintenance of this product must be performed by individuals who are

knowledgeable about the procedures, precautions and hazards associated with the product.

WARNING:

To reduce the risk of personal injury from hot surfaces, allow the drives and the internal

system components to cool before touching them.

CAUTION:

Do not operate the server for long periods with the access panel open or removed.

Operating the server in this manner results in improper airflow and improper cooling that can lead to
thermal damage.

Preparation procedures

Powering down the server

Before powering down the server for any upgrade or maintenance procedures, perform a backup of critical
server data and programs.

IMPORTANT:

When the server is in standby mode, auxiliary power is still being provided to the system.

To power down the server, use one of the following methods:

• Press and release the Power On/Standby button.

Removal and replacement procedures

Содержание ProLiant DL388 Gen10










































































































































































Результаты поиска

Содержание ProLiant DL388 Gen10

Отзывы:

Похожие инструкции для ProLiant DL388 Gen10

Бренды по названию

Популярные бренды

HPE ProLiant DL388 Gen10, Руководство по техническому обслуживанию и ремонту

Результаты поиска

Содержание ProLiant DL388 Gen10

Отзывы:

Похожие инструкции для ProLiant DL388 Gen10

Бренды по названию

Популярные бренды