20
Figure 20 Connecting an AC power cord to the router
Verifying the installation
After you complete the installation, verify that:
•
There is enough space for heat dissipation around the router, and the rack or workbench is
stable.
•
Interface modules are correctly installed.
•
The router, rack, and power cord are reliably grounded.
•
The correct power source is used.
Powering on the router
Verifying before power-on
Before powering on the router, verify the following items:
•
The power modules are correctly installed.
•
The power cord and grounding cable are correctly connected.
•
The power source voltage meets the requirement of the router.
•
The console cable is correctly connected, the terminal or PC used for configuration has started,
and the configuration parameters have been set.
•
If a CF card is used, verify that the CF card is in position.
•
Make sure the installed interface modules are in position.
Powering on the router
1.
Turn on the switch of the power supply system for the router.
2.
Turn on the switch of the AC or DC power modules.
