24
Replacement procedure
CAUTION:
SICs and DSICs are not hot swappable. Make sure the router is powered off before replacing a SIC
or DSIC.
Replacing a SIC
1.
Loosen the captive screws on the SIC.
2.
Gently pull the SIC out along the slide rails.
3.
Install a new SIC. For the installation procedure, see "Installing the router."
If you do not install a SIC, install a filler panel and tighten the screws.
Figure 21 Removing a SIC
Figure 22 Installing a filler panel
Replacing a DSIC
1.
Loosen the captive screws on the DSIC.
2.
Gently pull the DSIC out along the slide rails.
If you need to install a DSIC or SICs, see "Installing the router" for the installation procedure.
To install filler panels, proceed to steps 3 and 4.
3.
Gently push the slot divider into the DSIC slot along the slide rails and tighten the screws.
