41
7.
Connect the female end of the AC power cord to the AC input port on the A-RPS800. Connect
the male end of the AC power cord to the external power supply socket.
Installing a CF card to the MPU (optional)
If you select an MPU that supports the CF card, you can install a CF card as needed.
To install a CF card:
1.
Use a hard object to push the CF card eject button all the way into the slot, and make sure the
button does not project from the panel.
2.
Push the CF card all the way into the CF card slot so that it does not project. At the same time,
the eject button projects.
Figure 36 Installing a CF card
Installing a transceiver module (optional)
CAUTION:
•
To avoid component damage, read this section carefully before installing a transceiver module.
•
Do not remove the dust plug from a transceiver module until you are ready to connect an optical fiber to the
module.
•
Before you install a transceiver module, remove the optical fiber (if any) from it.
The transceiver modules available for the switch include SFP, SFP+, XFP, and QSFP+.
Installing an XFP/SFP+/SFP/QSFP+ module
Two types of QSFP+ transceiver modules are available. One type uses a metal pull latch and the
other type uses a plastic pull latch. The installation procedure is the same for the two types of QSFP+
transceiver modules.
The installation procedure is similar for the XFP, SFP+, SFP, and QSFP+ transceiver modules. This
section uses the SFP+ transceiver modules as an example.
To install a transceiver module:
1
2
