HPE FlexNetwork 7500 Switch, Руководство по установке

Страница: 22 / 149

16
•
Other models
—Install the cable management brackets to the mounting brackets, and then
install the mounting brackets to the chassis. For more information, see " Installing the cable
management brackets on other models " and " Installing the mounting brackets ."
Installing the cable management brackets on the 7506-V
The 7506-V has two cable management brackets: the one with a tray is installed at the lower part of
the switch, and the one without a tray is installed at the upper part of the switch. They are installed in
the same way.
To install a cable management bracket:
1.
Unpack the cable management brackets.
2.
Attach the cable management bracket to the chassis, and align the screws with the screw holes
in the chassis, as shown in
Figure 10 .
3.
Fasten the screws.
Figure 10 Installing cable management brackets on a 7506-V
Installing the cable management brackets on other models
For the models except the 7506-V, install the cable management bracket on the left mounting
bracket, as shown in
Figure 11 . The switch is supplied with two mounting brackets, and the one with
the cable management bracket screw holes is the left mounting bracket.
1
1
2
2
2
2