26
Installing a power supply
CAUTION:
If the captive screws cannot be fastened, verify that the power supply is correctly installed.
To install a power supply:
1.
Wear an ESD wrist strap and make sure it has good skin contact and is reliably grounded. For
more information, see "
."
2.
Remove the blank filler (if any) from the slot to be used. Keep the blank filler secure for future
use.
3.
Unpack the power supply, and verify that the power supply model is correct.
4.
Insert the power supply with its upside up.
5.
Grasping the handle of the module with one hand and supporting the module bottom with the
other, gently push the power supply along the guide rails into the slot until it has firm contact
with the slot.
6.
Use a Phillips screwdriver to fasten the captive screws on the power supply to secure the power
supply into the chassis.
Figure 21 Installing a power supply (PSR1400-D)
