HPE FlexNetwork 5130 EISeries Скачать руководство пользователя страница 27 | Manualshive

Страница: 27 / 67

background image

Step Description

switches.

workbench

."

3.

Connect grounding
cables and power
cords.

Grounding the switch

" and "

Connecting the power cord

."

4.

Power on the
switches.

N/A

5.

Configure basic IRF
settings.

See

HPE FlexNetwork 5130 EI Switch Series IRF Configuration Guide

.

6.

Connect the physical
IRF ports.

Connect physical IRF ports on switches. Use SFP+ transceiver modules and
fibers for connections over a long distance, or use SFP+ cables or twisted pair
cables for connections over a short distance.
All switches except the master switch automatically reboot, and the IRF fabric
is established.

Planning IRF fabric setup

This section describes issues that an IRF fabric setup plan must cover.

Planning IRF fabric size and the installation site

Choose switch models and identify the number of required IRF member switches, depending on the
user density and upstream bandwidth requirements. The switching capacity of an IRF fabric equals
the total switching capacities of all member switches.

An HPE FlexNetwork 5130 IRF fabric can have a maximum of 9 switches.

Plan the installation site depending on your network solution, as follows:

•

Place all IRF member switches in one rack for centralized high-density access.

•

Distribute the IRF member switches in different racks to implement the ToR access solution for
a data center.

Identifying the master switch and planning IRF member IDs

Determine which switch you want to use as the master for managing all member switches in the IRF
fabric. An IRF fabric has only one master switch. You configure and manage all member switches in
the IRF fabric at the CLI of the master switch. IRF member switches automatically elect a master.
You can affect the election result by assigning a high member priority to the intended master switch.
For more information about master election, see

HPE FlexNetwork 5130 EI Switch Series IRF

Configuration Guide

.

Prepare an IRF member ID assignment scheme. An IRF fabric uses member IDs to uniquely identify
and manage its members, and you must assign each IRF member switch a unique member ID.

Planning IRF topology and connections

You can create an IRF fabric in daisy chain topology or more reliable ring topology. In ring topology,
the failure of one IRF link does not cause the IRF fabric to split as in daisy chain topology. Instead,
the IRF fabric changes to a daisy chain topology without interrupting network services.

You connect the IRF member switches through IRF ports, the logical interfaces for the connections
between IRF member switches. Each IRF member switch has two IRF ports: IRF-port 1 and IRF-port
2. To use an IRF port, you must bind at least one physical port to it.

«
...
25
26
27
28
29
...
»

Содержание FlexNetwork 5130 EISeries




































































Отзывы:

Нет отзывов

Похожие инструкции для FlexNetwork 5130 EISeries

WJSX150 - SWITCHER - ADDENDUM

Бренд: Panasonic Страницы: 48

Бренд: Barco Страницы: 6

Бренд: Eaton Страницы: 8

Бренд: IDEC Страницы: 5

Бренд: IDEC Страницы: 7

Бренд: BERNSTEIN Страницы: 3

Бренд: Top View Страницы: 2

SmartNode 4658 Series

Бренд: Patton electronics Страницы: 12

Бренд: Setra Systems Страницы: 4

Бренд: H3C Страницы: 10

Бренд: IPGARD Страницы: 2

START-LINE AGC-3500

Бренд: Trust Страницы: 16

Бренд: Atlona Страницы: 22

Бренд: Lindy Страницы: 54

Бренд: Opengear Страницы: 109

Бренд: Rackmount Страницы: 16

Бренд: Black Box Страницы: 2

Бренд: Gefen Страницы: 48

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды