HPE FlexFabric 5940 SERIES, Руководство по настройке безопасности

Страница: 31 / 571

18
No. Subattribute Description
145 Acct_IPv6_Output_Octets
Bytes of IPv6 packets in the outbound direction. The measurement unit
depends on the configuration on the device.
146 Acct_IPv6_Input_Packets
Number of IPv6 packets in the inbound direction. The measurement
unit depends on the configuration on the device.
147
Acct_IPv6_Output_Packe
ts Number of IPv6 packets in the outbound direction. The measurement
unit depends on the configuration on the device.
148
Acct_IPv6_Input_Gigawor
ds Bytes of IPv6 packets in the inbound direction. The measurement unit
is 4G bytes.
149
Acct_IPv6_Output_Gigaw
ords Bytes of IPv6 packets in the outbound direction. The measurement unit
is 4G bytes.
155 User-Roles List of space-separated roles of the user.
210 Av-Pair
Vendor-specific attribute pair. Available attribute pairs include:
•
Server-assigned dynamic WEP key in the format of
leap:session-key=xxx.
•
Server-assigned voice VLAN in the format of
device-traffic-class=voice.
•
Server-assigned user role in the format of shell:role=xxx.
•
Server-assigned ACL in the format of url-redirect-acl=xxx.
•
Server-assigned Web redirect URL in the format of
url-redirect=xxx.
•
Server-assigned command to reboot a port, in the format of
subscriber:command=bounce-host-port.
•
Server-deployed command to shut down a port, in the format of
subscriber:command=disable-host-port.
215 Accounting-Level ITA traffic level in the range of 1 to 8.
216 Ita-Policy ITA policy name.
230 Nas-Port Interface through which the user is connected to the NAS.
246 Auth_Detail_Result
Accounting details. The server sends Access-Accept packets with
subattribute 250 and this subattribute in the following situations:
•
1 —The subscriber charge is overdue. The subscriber is allowed
to access network resources in the whitelist. If the subscriber
accesses other network resources, the device redirects it to the
URL specified by subattribute 250.
•
2 —The broadband lease of the subscriber expires. The device
redirects the subscriber to the URL specified by subattribute 250
when the subscriber requests to access webpages for the first
time.
247
Input-Committed-Burst-Si
ze
Committed burst size from the user to the NAS, in bits. The total length
cannot exceed 4 bytes for this field.
This subattribute must be assigned together with the
Input-Average-Rate attribute.
248
Output-Committed-Burst-
Size
Committed burst size from the NAS to the user, in bits. The total length
cannot exceed 4 bytes for this field.
This subattribute must be assigned together with the
Output-Average-Rate attribute.
249 authentication-type
Authentication type. The value can be:
•
1 —Intranet access authentication.
•
2 —Internet access authentication.
If the packet does not contain this subattribute, common authentication
applies.