HPE FlexFabric 5940 SERIES, Руководство по настройке безопасности

Страница: 189 / 571

176
Session group profile: N/A
ACL: N/A
CAR: N/A
Configuring re-DHCP portal authentication
Network requirements
As shown in Figure 56 , the host is directly connected to the switch (the access device). The host
obtains an IP address through the DHCP server. A portal server acts as both a portal authentication
server and a portal Web server. A RADIUS server acts as the authentication/accounting server.
Configure re-DHCP portal authentication. Before passing the authentication, the host is assigned a
private IP address. After passing the authentication, the host gets a public IP address and can
access network resources.
Figure 56 Network diagram
Configuration prerequisites and guidelines
•
Configure IP addresses for the switch and servers as shown in Figure 56 and make sure the
host, switch, and servers can reach each other.
•
Configure the RADIUS server correctly to provide authentication and accounting functions.
•
For re-DHCP portal authentication, configure a public address pool (20.20.20.0/24) and a
private address pool (10.0.0.0/24) on the DHCP server. (Details not shown.)
•
For re-DHCP portal authentication:
{
The switch must be configured as a DHCP relay agent.
{
The portal-enabled interface must be configured with a primary IP address (a public IP
address) and a secondary IP address (a private IP address).
For information about DHCP relay agent configuration, see Layer 3—IP Services Configuration
Guide .
•
Make sure the IP address of the portal device added on the portal server is the public IP
address (20.20.20.1) of the switch's interface connecting the host. The private IP address range
for the IP address group associated with the portal device is the private subnet 10.0.0.0/24
where the host resides. The public IP address range for the IP address group is the public
subnet 20.20.20.0/24.
Configuration procedure
Perform the following tasks on the switch.
1. Configure a RADIUS scheme:
192.168.0.111/24
192.168.0.113/24
192.168.0.112/24
Switch Host
automatically obtains
an IP address
Vlan-int100
20.20.20.1/24
10.0.0.1/24 sub
Vlan-int2
192.168.0.100/24
Portal Server
RADIUS server
DHCP server