Item
Description
Quantity
Gasket, 15x15
Foam for sealing the rack
1
HPE G2 Rack
Grounding Kit
Cables, screws, and washers used to
ground the rack through the rack frame
1
HPE G2 Rack
Baying Kit
Brackets and screws used to bay the
racks together on either a 600mm or 24-
inch pitch
1
Rack Hardware Kit Screws, cage nuts, and other hardware
used to install servers to the EIA rail
1
Cable ties
Used to attach cables to the rack
1
Transportation
bracket kit
Install these brackets when rack is fully
loaded and will be shipped
1
Option Kits
HPE ARCS Water Hook-Up Kit
Hewlett Packard Enterprise recommends using the HPE Adaptive Rack Cooling SystemWater Hook-Up
Kit to connect the HPE Adaptive Rack Cooling System to a facility water supply. Each kit includes two
hose assemblies with 2-inch sanitary flange connections that are required for connecting the facility
supply and return lines to the main inlet and outlet connections of an HPE Adaptive Rack Cooling
System. One Water Hook-Up Kit is required for each HPE Adaptive Rack Cooling System.
NOTE:
To properly connect the Water Hook-Up Kit, the facility plumbing connection must be a 2-inch
flange fitting.
NOTE:
The illustration is not drawn to scale. The actual length of the hoses is approximately 1.83 m (6 ft).
HPE ARCS 42U Air Rack Installation Kit
18
Installation
