Diagnostic tools
Product QuickSpecs
For more information about product features, specifications, options, configurations, and compatibility, see the
product QuickSpecs on the Hewlett Packard Enterprise website (
).
AMI MegaRAC SP-X GUI
The AMI MegaRAC SP-X is a server management solution composed of both firmware and software
components. Use the browser-based MegaRAC SP-X GUI to remotely monitor and configure the server. For
more information, see the
HPE Apollo 70 System BMC Web UI User Guide
on the Hewlett Packard
Enterprise website (
http://www.hpe.com/support/apollo70-BMC-UG
).
AMI Aptio Setup Utility
The AMI Aptio V Setup Utility is embedded in the system ROM. This utility enables you to perform a wide
range of configuration activities, including the following:
• Configuring system devices and installed options
• Enabling and disabling system features
• Displaying system information
• Selecting the primary boot controller
• Configuring memory options
For more information, see the
HPE Apollo 70 System UEFI User Guide
on the Hewlett Packard Enterprise
http://www.hpe.com/support/apollo70-UEFI-UG
Launching the Embedded UEFI Shell
Use the
Built-in EFI Shell
option to launch the Embedded UEFI Shell. The Embedded UEFI Shell is a
preboot command-line environment for scripting and running UEFI applications, including UEFI boot loaders.
The Shell also provides CLI-based commands you can use to obtain system information, and to configure and
update the system BIOS.
The Built-in EFI Shell is enabled by default.
Procedure
1.
Access the Aptio V Setup Utility. During POST, press
Del
or
Esc
.
2.
To set the Built-in EFI Shell priority sequence in the predefined boot order settings, do the following:
a.
Select
Boot
>
Boot Option Priorities
>
UEFI: Built in EFI Shell
, and then press
Enter
.
b.
Set the preferred boot sequence for the Built-in EFI Shell.
c.
Press
F4
to save the boot selection, and then close the Setup Utility.
3.
To select the Built-in EFI Shell for a one-time boot override, select
Save & Exit
, and then in the Boot
Override section, select
UEFI: Built in EFI Shell
.
4.
If an administrator password is set, enter it at the prompt and press
Enter
.
36
Diagnostic tools
Содержание Apollo z70
