HPE Apollo z70 Скачать руководство пользователя страница 57

Страница: 57 / 60

Support and other resources

Accessing Hewlett Packard Enterprise Support

• For live assistance, go to the Contact Hewlett Packard Enterprise Worldwide website:

http://www.hpe.com/info/assistance

• To access documentation and support services, go to the Hewlett Packard Enterprise Support Center

website:

http://www.hpe.com/support/hpesc

Information to collect

• Technical support registration number (if applicable)

• Product name, model or version, and serial number

• Operating system name and version

• Firmware version

• Error messages

• Product-specific reports and logs

• Add-on products or components

• Third-party products or components

Accessing updates

• Some software products provide a mechanism for accessing software updates through the product

interface. Review your product documentation to identify the recommended software update method.

• To download product updates:

Hewlett Packard Enterprise Support Center

www.hpe.com/support/hpesc

Hewlett Packard Enterprise Support Center: Software downloads

www.hpe.com/support/downloads

Software Depot

www.hpe.com/support/softwaredepot

• To subscribe to eNewsletters and alerts:

www.hpe.com/support/e-updates

• To view and update your entitlements, and to link your contracts and warranties with your profile, go to the

Hewlett Packard Enterprise Support Center

More Information on Access to Support Materials

page:

www.hpe.com/support/AccessToSupportMaterials

IMPORTANT:

Access to some updates might require product entitlement when accessed through the

Hewlett Packard Enterprise Support Center. You must have an HPE Passport set up with relevant
entitlements.

Support and other resources

Содержание Apollo z70





























































Результаты поиска

Содержание Apollo z70

Отзывы:

Похожие инструкции для Apollo z70

Бренды по названию

Популярные бренды

HPE Apollo z70, Руководство по техническому обслуживанию и ремонту

Результаты поиска

Содержание Apollo z70

Отзывы:

Похожие инструкции для Apollo z70

Бренды по названию

Популярные бренды