To replace the component, reverse the removal procedure.
Removing and replacing the server blank
CAUTION:
To prevent improper cooling and thermal damage, do not operate the chassis unless all bays
are populated with a component or a blank.
CAUTION:
To avoid damage to the server or server blank:
• Always support the bottom of the server or server blank when removing it from the chassis.
• Do not use the release lever to carry the server or server blank.
Procedure
1.
Remove the server blank:
a.
Loosen the release lever thumbscrew.
b.
Open the release lever.
c.
Remove the server blank out of the chassis.
32
Removal and replacement procedures
Содержание Apollo z70
