HPE Apollo sx40, Руководство по техническому обслуживанию и ремонту

Страница: 70 / 76


7-2 Specifications P05957-002
Extended ambient operating
support System performance during standard operating support may be
reduced if operating with a fan fault or above 30°C (86°F)


For approved hardware configurations, the supported system inlet
range is extended to be: 5° to 10°C (41° to 50°F) and 35° to 40°C
(95° to 104°F) at sea level with an altitude derating of 1.0°C per
every 175 m (1.8°F per every 574 ft) above 900 m (2953 ft) to a
maximum of 3050 m (10,000 ft)


The supported system inlet range is extended to be: 40° to 45°C
(104° to 113°F) at sea level with an altitude derating of 1.0°C per
every 125 m (1.8°F per every 410 ft) above 900 m (2953 ft) to a
maximum of 3050 m (10,000 ft)


System performance may be reduced if operating in the extended
ambient operating range or with a fan fault
Non-operating -30° to 60°C (-22° to 140°F)


Maximum rate of change is 20°C/hr (36°F/hr)
Relative humidity (Non-condensing)
Operating Minimum to be the higher (More moisture) of -12°C (10.4°F) dew
point or 8% relative humidity


Maximum to be the lower (Less moisture) of 24°C (75.2°F) dew
point or 90% relative humidity
Non-operating 5% to 95% relative humidity, 38.7°C (101.7°F) maximum wet bulb
temperature, non-condensing
Altitude
Operating 3050 m (10,000 ft)


Maximum allowable altitude change rate is 457 m/min (1500 ft/min).
Acoustic noise
Idle All configuration SKUs:
LWAd: 6.9 B

LpAm: 51 dBA
Operating Entry configuration SKU:
LWAd: 8.0 B

LpAm: 62 dBA
Base configuration SKU:
LWAd: 8.3 B

LpAm: 66 dBA
Performance configuration SKU:
LWAd: 8.7 B

LpAm: 72 dBA
Table 7-2 (continued) Environmental specifications
Feature Description