3
4
Drive Carrier LEDs
The server chassis uses SATA drives. Each SATA drive carrier has two LEDs.
Table 4-2
describes
the functions of the two LEDs.
Refer to
“Installing and Removing Disk Drives”
for instructions on replacing failed drives.
Table 4-2
Disk Carrier LEDs
LED
Description
Blue
Each Serial ATA drive carrier has a blue LED. When illuminated, this blue LED
(on the front of the SATA drive carrier) indicates drive activity. A connection to
the SATA backplane enables this LED to blink on and off when that particular
drive is being accessed.
Red
An illuminated red LED indicates a SATA drive failure. If one of the SATA
drives fails, you should be notified by your system management software.
