HPC EI Series, Инструкция по установке и эксплуатации

Страница: 11 / 45

11
Remote LP Tank System Enclosure Requirements - If Applicable
Propane Cylinder: Safety Requirements
• This appliance has been designed for use with a 20-lb. or 30-lb.
size propane cylinder (not supplied).
• The propane cylinder should be checked by your propane
supplier prior to installation and use.
• Never use a cylinder with a damaged valve. A worn cylinder may be
hazardous and should be checked by your propane supplier.
• Use only a propane supply cylinder constructed and marked in
accordance with the specifications for LP gas cylinders by the National
Standard of Canada, CAN/CSA B339, Cylinders, Spheres and Tubes for
Transportation of Dangerous Goods; and Commission, as applicable or
the Specifications for LP-Gas Cylinders of by the U.S. Department of
Transportation (DOT).
• Do not store a spare LP-gas cylinder under or near this appliance.
• Never fill the cylinder beyond 80 percent full.
• Only use the pressure regulator and hose assembly provided with this
appliance or replacement pressure regulators and hose assemblies as
specified by the manufacturer. The regulator supplies a pressure of 11
inches water column to the appliance and has a QCC1 type fitting.
Propane cylinder specifications
• The propane cylinder must be provided with a cylinder
connection device compatible with the connection for outdoor
appliances.
• The propane cylinder must be supplied with a shut-off valve terminating in
a propane cylinder valve type QCC1 and include a collar to protect the
cylinder valve. A QCC1 cylinder has a positive seating connection, which
will not allow gas to flow until a positive seal has been achieved. It is also
equipped with an excess flow device. In order to attain full flow to the
appliance, the valve must be in the off position when the cylinder valve is
turned on.
• The propane cylinder must have a safety relief device having direct
communication with the vapor space of the cylinder.
• The cylinder supply system must be arranged for vapor withdrawal.
• The cylinder shall incorporate listed overfill protection device (OPD).