HPA-Faip M 824, Руководство оператора

Страница: 20 / 37

Operator's manual M 824 57
EN
- Connect the Doyfe inflator chuck on the
air hose to the valve stem.
Inflate the tyre by operating the proper
pedal (Fig. 26) at short intervals; check
the pressure gauge (1, Fig. 25) frequently
to make sure that the pressure NEVER
exceeds the maximum pressure specified
by the tyre manufacturer.
26
Inflating tubeless tyres
(FS versions only)
WARNING
Before carrying out the operations des-
cribed below, always make sure that
there is no dirt, dust or other impurities
on the jaws near the air outlet holes.
- Make sure that the wheel is secured to
the table top with inside clamping (Fig.
27).
27
DANGER
NEVER exceed the pressure value re-
commended by the tyre manufacturer.
Tyres may explode if inflated beyond
these limits or their structure may be
damaged seriously although not visibly
at that moment. KEEP YOUR HANDS
AND BODY AWAY FROM THE TYRE
DURING INFLATION. Avoid being dis-
tracted during this operation and check
the tyre pressure often to prevent the
tyre from being excessively inflated. A
bursting tyre can cause serious inju-
ries or even death.
Inflating procedure
The machine has a pedal for inflating the
tyre and a pressure gauge for reading the
tyre pressure.
- Release the wheel from the sliding
clamps on the table top.
- Bring the horizontal arm to the fully ex-
tended position.
- Lower the vertical rod until it touches the
rim.
- Lock the horizontal arm and the vertical
rod in the positions described above fig.
25.
25
1