HP ZX2000 Скачать руководство пользователя страница 75

Страница: 75 / 136

technical reference guide

3–23

System Configuration

baseboard management controller (BMC)

This section explains the BMC command-line interface. Topics include:

■

Using the BMC command line interface (CLI), page 3-23

■

BMC commands, page 3-24

using the BMC command line interface (CLI)

To log in to the BMC command line interface, use a serial connection and terminal emulation
software:

1. With the workstation turned off, connect a null-modem cable to

Serial Port 1

on the rear

panel of the workstation (see page 17), and to your remote device.

2. Configure the terminal emulation software with these settings:

❏

Baud rate: 9600

❏

Bits: 8

❏

Parity: None

❏

Stop Bits: 1 (one)

❏

Flow Control: XON/XOFF

NOTE:

The default terminal emulation type is VT100+. Terminal emulation for the BMC cannot

be changed. The default baud rate is 9600. This setting can be changed using the EFI

baud

command.

3. Using the terminal emulation, connect to the workstation with a

direct connection

4. To access the BMC command line interface, press

Esc (

For example, on a U.S. QWERTY keyboard, press

Esc

, then press

Shift

and

at the same

time.

5. If prompted, enter the user or admin password at the login prompt:

If no password is defined, you are not prompted for one.

NOTE:

If AC power is connected to the system, this command activates the BMC command line

interface even if the workstation power is off.

6. The BMC prompt displays. If you entered the admin password, you have full access. If you

entered the user password, you have restricted access.

Admin Session Initiated

cli>

User Session Initiated

cli>

Содержание ZX2000









































































































































Результаты поиска

Содержание ZX2000

Отзывы:

HP ZX2000, Техническое справочное руководство, Страница: 75 / 136

Результаты поиска

Содержание ZX2000

Отзывы: