manualshive.com logo in svg

HP ZX2000, Техническое справочное руководство, Страница: 42 / 136

Поделиться
Скачать
HP ZX2000 Скачать руководство пользователя страница 42

2–26

technical reference guide

Installing or Replacing Parts and Accessories

airflow guide

The airflow guide on your system ensures that the proper volume of air for cooling the voltage 
regulator modules (VRMs), processor, and processor power module flows over these 
components. 

You may need to replace the airflow guide if it becomes damaged to the point that airflow across 
the processor is restricted. You may need to remove the airflow guide to gain access to 
components under it.

removing the airflow guide

1. Turn off the system and 

disconnect all power

.

2. Disconnect all cables, and remove the system covers.

3. Raise the hard drive cage and remove the AGP retainer arm. 

4. Lift the airflow guide out of the system chassis.

Airflow Guide

replacing the airflow guide

1. Insert the airflow guide so the CPU assembly fits into the opening in the guide.

2. Lower the hard drive cage, making sure it lowers fully and fits firmly against the airflow 

guide and replace the AGP retainer arm.

3. Replace the system covers and reconnect all cables.

Содержание ZX2000









































































































































Отзывы:

Нет отзывов