manualshive.com logo in svg

HP ZBook Studio G 315-ap000 - 15ap099, Руководство по техническому обслуживанию и ремонту

Поделиться
Скачать
HP ZBook Studio G 315-ap000 - 15ap099 Скачать руководство пользователя страница 5

Safety warning notice

WARNING!

To reduce the possibility of heat-related injuries or of overheating the computer, do not place 

the computer directly on your lap or obstruct the computer air vents. Use the computer only on a hard, flat

 

surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as 
pillows or rugs or clothing, to block airflow. Also, do not allow the AC adapter to contact the skin or a soft 
surface, such as pillows or rugs or clothing, during operation. The computer and the AC adapter comply with 
the user-accessible surface temperature limits defined by the International Standard for Safety of 
Information Technology Equipment (IEC 60950-1).

v

Содержание ZBook Studio G 315-ap000 - 15ap099


























































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды