manualshive.com logo in svg

HP ZBook Studio G 315-ap000 - 15ap099, Руководство по техническому обслуживанию и ремонту

Поделиться
Скачать
HP ZBook Studio G 315-ap000 - 15ap099 Скачать руководство пользователя страница 24

Right

Component

Description

(1)

Audio-out (headphone)/Audio-in (microphone) 
combo jack

Connects optional powered stereo speakers, headphones, 
earbuds, a headset, or a television audio cable. Also connects an 
optional headset microphone. This jack does not support 
optional microphone-only devices.

WARNING!

To reduce the risk of personal injury, adjust the 

volume before putting on headphones, earbuds, or a headset. 
For additional safety information, refer to the Regulatory, 
Safety, and Environmental Notices.

To access this guide in Windows 10:

1.

Type 

support

 in the taskbar search box, and then select 

the HP Support Assistant app.

‒

 or –

Click the question mark icon in the taskbar.

2.

Select My PC, select the Specifications tab, and then 
select User Guides.

To access the user guides in Windows 7, select Start > All 
Programs > HP Help and Support > HP Documentation.

NOTE:

When a device is connected to the jack, the computer 

speakers are disabled.

(2)

USB 3.0 port

Connects an optional USB device, such as a keyboard, mouse, 
external drive, printer, scanner, or USB hub.

(3)

HDMI port

Connects an optional video or audio device, such as a high-
definition television, any compatible digital or audio 
component, or a high-speed High Definition Multimedia 
Interface (HDMI) device.

(4)

USB Type-C (charging) ports (2)

Connect any USB device with a Type-C connector.

NOTE:

USB Type-C ports charge products such as cell phones, 

laptops, tablets, and MP3 players, even when the computer is 
off. Also, some USB Type-C ports connect DisplayPort, VGA, 
HDMI and other video devices to provide video output.

NOTE:

Adapters (purchased separately) may be required.

(5)

Power connector

Connects an AC adapter.

(6)

 

AC adapter and battery light

●

White: The AC adapter is connected.

10

Chapter 2   External component identification

Содержание ZBook Studio G 315-ap000 - 15ap099


























































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды